Dartronics provided a solution to flip cases 90 degrees in-line on a roller conveyor. The Paragon Labeler prints and applies labels to the trailing panel. Further downstream is a DartJet inkjet printer to print on the top of the box.
Dartronics is pleased to present automatic pick and place of zippered bags. This allows us to place bags onto a conveyor for labeling or ink jet printing. Up to 50 zippered bags are loaded and collected at exit end. Speed in video was 60 bags per minute.
Dartronics provides an integrated EASTEY Vertical Case Transport and Paragon Print and Apply Labeling System with catch bin.
The Vertical Case Transport wtih Wrap Around Labeling System includes the ALTech Labeling system which applies wrap-around labels with precision while the HSAJet Minikey printer marks the lot number on the case. The Eastey VCTS feeds cases one at a time allowing them to be labeled and marked, then restacked in a hopper.
Dartronics provided Eastey Vertical Transport System “VCTS” and Apply Only Labeler “Altech ALritma”. Labeling at up to 72 feet per minute. Integrated System with product catch bin.
Dartronics Table Top Flag Labeler Applicator is used for applying flagged labels to many products. The Flag Labeler folds and meets the ends of the label perfectly around the product. Customized fixturing. Controlled via palm buttons, foot pedal, or safety light curtains. The machine shown in the video was both air and electric.
The customer wanted to decrease their inventory of pre-printed caulk tubes. The way we accomplished this was to print & apply barcode labels specific to the product allowing them to minimize inventory carrying generic caulk tubes. Shown at right is a Paragon Print & Apply Labeler with a high-speed tamp cylinder. After the label is applied, we scan the barcode to identify the correct barcode applied and verify the barcode is on every tube. Independent sensor controlled the labeler and the barcode scanner. The information to be printed comes from the production department via ethernet to the printer.
Dartronics is pleased to present the Pick and Place Bag Feeding and Labeling System. Our Dartronics Pick and Place unit are a PLC-controlled and adjustable configuration for narrower bags.
Dartronics provides pick and place feeding systems for zippered bags. The bags are stood on edge vertically, picked, and placed onto the shuttle table for precision alignment for labeling top and bottom.
Custom labeler for Clamshells, C-Clip, Top, Top, and Bottom Label Applications, as a labeling system application.
Dartronics is pleased to present the ALTech ALritma High-Performance Labeler with integrrated conveyor. Containers are hand applied onto conveyor for automated labeling both bottoms and tops of containers. Very accurate label placement.
The Vertical Case Transport wtih Labeling System is just one of many automated solutions that Dartronics provide. The ALTech Labeling system applies a label across two panels of a flat case with precision while the HSAJet Minikey printer marks the lot number. The Eastey VCTS feeds cases one at a time allowing them to be labeled and marked, then restacked in a hopper.
Dartronics provides labeling solutions for labeling pails with handles. In this video, you will observe The AlTech Labeling System applying labels to the front and back of the pail. This process is much faster and more accurate than hand labeling. With automation, the speed went from 5 pails/min to 20 pails/min.
Customers needed to increase productivity and placement of the top and bottom labeling. Dartronics provided a turn-key solution to properly label products at up to 30 per minute. Shown at right is a custom split conveyor system with separation in middle for dual label application. The top labeler is applied only and the bottom labeler is Print & Apply. Application speeds are matched to the conveyor speeds to provide proper placement of labels on the product. All products were the same width but varied in height and length. The system can be adjusted quickly for product changes.