Pro-Pen P-3000 High-Performance Technology Engraver

Micro-Percussion marking

The principle of micro-percussion marking is based on making indents in the material using a vibrating tool. This technology will not weaken the material to be marked, whatever its thickness may be.

All materials, provided they are not harder than 62 HRC, can be marked (metals, treated or untreated, wood and plastics).

Marking possibilities

- Marking zone: 100x100mm
- The thickness of material to be marked: Up to 300mm (280mm EM)
- Size of characters: From 1 to 80mm (increasing every 0.1mm)
- Available fonts: Standard, point separated, 5×7, CE logo
- Linear, angular, and circular marking
- Special marking (reversed, mirrored, reflected)
- Centering, compressing, italic, character spacing
- Dates and time, batch numbering, logotypes

P-3000 Brochure

Accessories
Technical

Accessories

Accessories available to order:

- Single or double tank air filter
- Pneumatic marking tools PN12 and PN22
- Set of feeler gauges
- Foot pedal (standard or industrial)
- Control panel
- Soundproof nameplate holder
- Magnetic clamping for plates
- Software PW03 for Windows® + RS 232 connection cable
- Third axis drive DP3000

Technical

Environment

Electricity supply: 115 or 230V as required\
Power: 120W, Frequency: between 50 and 60Hz
Required temperature: from 10 to 45°C
Marking tools:
> Pneumatic version: PN12 tool
> Electromagnetic version : EM11 tool
• Air supply (required for pneumatic version only):
> Required pressure: 5,5-bar nominal (80PSI)
> Pneumatic link: 1/8’’ gas female

Physical characteristics

Dimensions: Length = 420mm, Width = 270mm, Height = 740mm,
Weight: 29kg